Assembly Instructions:

Assembled Measurements (approx.):

​

Length: 5.31 in./13.5 cm.

Width: 4.31 in./11 cm.

Height: 5.31 in./13.5 cm.

​​​

All pieces have been printed and test-fitted. They snap together with no hardware or glue required. However, glue is recommended if the fit seems too loose or if the model will be handled frequently.

​

Default slicer settings were used for testing, but changed the layer height to 0.1 mm for the final print on certain pieces (body, roll bar, tires, rims).

​

Setup used for testing:

​

Bamboo P1S

ELEGOO PLA Plus Filament 1.75mm (Gray)

​